How to find and check a factory for a custom product
What to verify before you pay for a sample, why a marketplace listing is only a lead, and how the work changes when a sourcing team does the checking for you.
Updated 8 November 2026
Confirm that the factory makes your type of product, and don't take a good-looking online profile as proof. Before you pay for a sample, check how the product will be built, whether the factory can handle your decoration and quantity, and what the sample will actually show you.
Why a marketplace listing is only a starting point
The seller writes the listing to get enquiries. The photos may show an item the company trades and does not make, the categories are broad, and "customisation available" often means a logo on an existing item, not a new construction.
Read a listing as a lead. It tells you the company exists and roughly what it sells. It does not tell you whether it can build your product to your specification in your quantity.
What to verify before paying for a sample
Go through these points before anyone asks you for a sample fee, and before you pay one.
- Maker or trader. Ask who owns the production line. A trader can work well, but you need to know who makes the product and who answers when something goes wrong.
- Category fit. Ask for examples with the same construction: the same material, closures and panels. A factory that moulds plastic parts is not automatically the right place for a stitched textile item.
- Tooling. Find out whether your product needs a mould, who pays for it and who owns it afterwards. Settle this before sampling.
- Decoration method. Ask whether printing or embroidery happens in the factory or is outsourced, what the maximum print area is and how many colours the method allows. If you need an exact Pantone, put it in writing and ask how it will be matched.
- Minimum quantity. A sample that works at a volume you cannot order wastes your time and money.
- Compliance. Tell the factory where the product will be sold and ask which test reports and documents it can supply for that market. "Certified" on its own is not an answer. Ask for the documents and have them checked against the rules of the destination.
- How they communicate. A factory that gives specific answers to technical questions is more likely to run production with the same care. Vague answers now tend to stay vague later.
Questions to ask, in order
Start with the checks that cost nothing, so the weakest candidates drop out early.
First, confirm the basics by message: maker or trader, product category, minimum quantity. Second, send a proper brief with a drawing or reference photo, materials and decoration. Ask the factory to state in writing what it can do, what it would change and what it cannot do. Third, ask for the sample terms: which materials and process the sample uses, how long it takes, who pays for freight and what happens to the sample fee if you go into production.
Pay for a sample only when those answers hold together.
Make the sample worth paying for
A sample proves something only if it is made the way production will be made. If it is sewn by hand in a different workshop, or with a substitute material, approving it tells you little about the final order.
For custom products, a physical sample is approved before mass production. Write down exactly what you are approving: dimensions, colour, finish, closures, decoration position and packaging. That record is what you hold the production run against.
What changes when a sourcing team does it for you
The checks stay the same. The difference is that someone repeats them on every project, so you don't have to learn each step while a deadline is running.
At Opifix the work starts before any factory is contacted. In product creation, the AI reads the construction from a photo, sketch or description (materials, closures, panels, whether a mould is needed) and prepares a product sheet with four views. AI Studio puts your logo and Pantone colours on a mockup and says whether the product can start from a ready-made base or needs custom production, and gives the reason. Factories then receive a clear brief, which is the best way to avoid a sample that misses the point.
For the factory search, an AI research agent looks through B2B factory marketplaces for manufacturers that could make the product. Every factory it proposes has to come from a page it actually checked, and the Opifix team reviews the candidates. You see verified factories, not supplier names.
People at Opifix check every quote, sample and order. AI drafts, people decide. Quotes include production, decoration, freight and import duties, excluding VAT, so you compare complete offers. The first estimate is refined once factories quote.
What you still decide
A sourcing team does not replace your judgement about the product. You decide the design direction, the quantity, the deadline and whether the sample is right. Freight is also your call: sea is slower and usually cheaper, air is faster.
How to start a custom product with Opifix
Bring what you have: a reference photo, a sketch, a brief, or just an idea with audience, occasion, quantity and deadline. You can describe it in the Opifix AI chat.
From there the steps follow the order of this guide: product sheet, factory search, sample, quality checks and production. More practical material is on the Opifix guides page, and the company is introduced on the home page.
Pages mentioned
- Opifix AI chat
- Opifix guides (English)
- Opifix guide (Italiano)
- Opifix home (English)
- Opifix home (Italiano)
Drafted with AI assistance. Reviewed and approved by Marco Legnini on 8 November 2026.